CUSHION PLATE

본문 바로가기

CUSHION PLATE

CUSHION PLATE

HARDENED AND TEMPERED STRIP STEEL FOR CUSHION PLATE
A cushion plate is a plate that is positioned between the spring plate and the cushion.
Spring plate and cushion plate prevent damage.
Cushion plate is mostly used in automotive industry.
Cushion plate is produced with metal.
And also cushion plate quality has to be highest grade.
Which means cushion plate gives more efforts.

Specification

SPEC
THICKNESS 0.1 ~ 4.0 mm
WIDTH 5.0 - 450 mm
HARDNESS HV 300 ~ 600
STRUCTURE Bainite, Tempered Martensite
HARDNESS TOLERANCE ± HV 20 (Special ± HV 10)
STRAIGHTNESS Max 0.5mm / 1,000 mm length
CROSS CAMBER Max 3μm / mm Width (Special Max 1μm/ mm Width)
SURFACE COLOR Unpolished blue, Bright, Polished blue, Polished white,
Polished yellow
EDGE FINISH Slit edge, Deburred edge, Round edge, chamfered edge,
Square edge
INNER DIAMTER MIN. 300 ~ 600mm
OUTER DIAMETER MAX. 1,800mm

Application

CUSHION PLATE

Strip Steel for Automobile Industry

Specification

SPEC
THICKNESS 0.1 ~ 4.0 mm
WIDTH 5.0 - 450 mm
HARDNESS HV 300 ~ 600
STRUCTURE Bainite, Tempered Martensite
HARDNESS TOLERANCE ± HV 20 (Special ± HV 10)
STRAIGHTNESS Max 0.5mm / 1,000 mm length
CROSS CAMBER Max 3μm / mm Width (Special Max 1μm/ mm Width)
SURFACE COLOR Unpolished blue, Bright, Polished blue, Polished white,
Polished yellow
EDGE FINISH Slit edge, Deburred edge, Round edge, chamfered edge,
Square edge
INNER DIAMTER MIN. 300 ~ 600mm
OUTER DIAMETER MAX. 1,800mm

Application

Strip Steel for Saw Blade / Others

Strip Steel for Saw Blade/Others

Specification

SPEC
THICKNESS 0.1 ~ 4.0 mm
WIDTH 5.0 - 450 mm
HARDNESS HV 300 ~ 600
STRUCTURE Bainite, Tempered Martensite
HARDNESS TOLERANCE ± HV 20 (Special ± HV 10)
STRAIGHTNESS Max 0.5mm / 1,000 mm length
CROSS CAMBER Max 3μm / mm Width (Special Max 1μm/ mm Width)
SURFACE COLOR Unpolished blue, Bright, Polished blue, Polished white,
Polished yellow
EDGE FINISH Slit edge, Deburred edge, Round edge, chamfered edge,
Square edge
INNER DIAMTER MIN. 300 ~ 600mm
OUTER DIAMETER MAX. 1,800mm
Microstucture
  • Fully spheroidized pin-point carbides
  • Free of carbide network or lamellar pearlite and free of carbide alignment, uniformly distributed in a ferrite matrix.
  • Carbide size is less than 1 micron diameter, maximum carbide is not exceed 3 microns, carbide spacing shall not exceed 4microns.

Application

Strip Steel for Saw Blade / Others

Shaving Strip Steel

Edge finishing the right edge for every application

  • All kind of edge customer requirement, we can shave it precisely in the strip edge-deburred, round, chamfered, square, bevel shaved, bevel shaved +High frequency etc.
  • On request we can meet edge geometry of our strip steels exactly, so that customer uses it in their application, such as band saw, steel rule, rotary rule, springs etc.
  • We can also use our shaving machines to prepare the edge for final finishing on customer requirement.
SPEC
FINISH TYPE DEFINITION APPLICATION IMAGE
Slit edge sharp edged with slitting burrs left on left spring Strip Steel for Saw Blade / Others
Deburred edge slit edges from which burrs
have been removed
left spring Strip Steel for Saw Blade / Others
Round edge edged rounded power spring Strip Steel for Saw Blade / Others
Chamfered edge square edge with round corner saws and blades Strip Steel for Saw Blade / Others
Square edge sharp-cornered square edges band saws Strip Steel for Saw Blade / Others
Bevel shaved edge sharp-bevel rotary rule Strip Steel for Saw Blade / Others
Bevel shaved edge +
High frequency
sharp-bevel with high frequency of edge rotary rule Strip Steel for Saw Blade / Others

Available dimesion

Specification

SPEC
THICKNESS 0.1 ~ 4.0 mm
WIDTH 5.0 - 450 mm
HARDNESS HV 300 ~ 600
STRUCTURE Bainite, Tempered Martensite
HARDNESS TOLERANCE ± HV 20 (Special ± HV 10)
STRAIGHTNESS Max 0.5mm / 1,000 mm length
CROSS CAMBER Max 3㎛ / mm Width (Special Max 1㎛/ mm Width)
SURFACE COLOR Unpolished blue, Bright, Polished blue, Polished white, Polished yellow
EDGE FINISH Slit edge, Deburred edge, Round edge, chamfered edge, Square edge
INNER DIAMTER MIN. 300 ~ 600mm
OUTER DIAMETER MAX. 1,800mm

Unit Cutting Strip Steel

Specification

SPEC
THICKNESS 0.5 ~ 2.0 mm
WIDTH 10 ~ 100 mm
STRAIGHTNESS Max 0.5mm / 1,000mm length
CROSS CHAMBER Max. 3㎛ / mm Width (Special Max. lum / mm Width)

Specification for Oscillating

SPEC
THICKNESS ~ 2.0 mm
WIDTH ~ 70 mm
Unit Cutting Strip Steel

Technical information (Tolerance of form)

Strip Steel for Saw Blade / Others

Packing

Specification

SPEC
IN DIA METER 400 ~ 510 mm
OUT DIA METER(MAX) ~ 2,000 mm
WEIGHT (MAX) ~ 2,000 kg
REMARK In coil, Wrapped

브라우저 최상단으로 이동합니다 브라우저 최하단으로 이동합니다